For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

The Coolfire Z50 is a great choice for vapers looking for an intuitive but versatile device which is capable of both a MTL or a restricted DL vape. FAQSHowever, after I switched coils and pumped up the wattage to 18w I got about 5 hours vape time, still pretty good in my mind. Make sure the atomizer has been cooled down while you refill the tank because the liquid flows faster when the atomizer is hot. Created in collaboration with YouTube Reviewers Phil Busardo and Dimitris Agrafiotis, this is part of the Platform series of tanks and now mods.

Once you notice a deterioration in flavour, you'll need to change the coil in your Innokin Coolfire Z50. The Zlide tank included with this kit is compatible with Innokin Zenith Coils. The navigation on the Coolfire Z50 is rather simple which makes it very easy to change what you need; Keep reading to find out what this kit has to offer, and if the new Zlide tank has what it takes to impress one of the biggest fans of the original. The Innokin Coolfire Z50 Kit is the latest update in Coolfire range and is aimed at the vaping beginner or at the dedicated MTL vaper.Important battery safety information: You can charge your battery from a laptop or computer USB port, or use a USB mains charging adapter. Ensure output of the charging device is no more than 1A/5V. Do not charge from an integrated sofa USB port or any USB port that does not specify the power output. Don't take long draws or vaping with very short intervals between two drags. Each puff time shall be 4 seconds at most. The CoolFire Z50 is equipped with a full range of integrated safety protections you’d expect from Innokin: Overheat protection, Charging protection, Short circuit protection, High Resistance protection, Cut-Off protection and Over-discharge protection.

We have just launched the latest addition to our industry defining Coolfire series and we’re thrilled to see that it’s already winning prestigious awards. The Coolfire Z60 kit includes the new Zlide Top tank, plus a device with coil boosting technology and all-day battery life, in a super compact form factor. As stated the body is made of zinc alloy, it has a mostly round appearance, to the side of the screen you will find a micro USB port for charging. Please try to vape at an appropriately high wattage which is recommended on the coil during vaping. It may encounter thespittingissue if the liquid on the coil hasn't been atomized on time with low wattage. I received the Innokin Coolfire recently for review and realised that it is actually the first Innokin product that I have tested.The brand has been around for longer than I can remember but for some reason I’ve not been tempted by any of the previous products.On paper, there’s little outstanding about the Coolfire mod as it is very basic in functionality.The Zlide tank however, has received a lot of accolades fromthe POTV forum so I was very keen to test this kit.Did it deliver? Read on for my thoughts on the Coolfire Z50 Zlide kit.With the airflow at the tightest possible selection and the wattage still up at 14W, you can get a decent jump in flavour and the full range of flavour from the nic salt I was using really did come through to create a pleasant all round MTL vape. I think that I'm so used to vaping on pod kits and sub-ohm devices that I have become used to a warmer vape, especially with my love of dessert and custard short fill e-liquids. Please do not set it for a long time since the cotton will absorb liquid and will split from the mouthpiece while you inhale it. In this case, please upside down the tank and shake the inside spare juice off. After I used the 1.2Ω coil for a few days, I then moved onto the 0.8Ω Z coil which is another plain wire Kanthal and suitable for 50VG/50PG liquid.For this one, I used some Manabush 6mg freebase eliquid for a restrictive DL vape.Opening up the AFC fully and cranked up the power to the max 18 Watts (after breaking in the coil), I was pretty surprised how good this coil was.I was getting plenty of flavour, a nice throat hit and surprisingly large vapour production.I could quite happily chain vape it without any hints of a dry hit.I lowered the wattage to 15 watts and closed the airflow for a MTL draw, it was good but not as enjoyable as the 1.2Ω coil for my tastes. The coils are fine. I wouldn’t put them next to my favorite 0.8-ohm coils, but they are a good option for high-strength nicotine and seem to last long. I’ve been using one for a bit over a week now (I’m guessing around 20 mL or so) and it just started feeling a bit gunked. I probably won’t be getting more of those, but it may be a fit for your style of vaping. Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

Allow your coil to "break-in" before using it at the maximum recommended wattage level. Start your coils off at the low end of the recommended wattage range, and gradually increase to your desired wattage level slowly over the first day of using your new coil. I’ve been using the Novo pod system for about 2 years and got tired of leaky pods. The Innokin CoolFire Z50 was the perfect upgrade! It fits in the palm of my hand, easy to use and change coils, and I love having the ability to make adjustments for the perfect vape experience!Batteries are covered by our six-month warranty. If your battery is still under warranty, you can exchange it for an operational one. This warranty applies to the product under normal use. In the event you need to exchange your Innokin product, simply complete theReplacement Merchandise Authorization (RMA)form online. Use a certified wall charger with a high quality microUSB cable, such as the cable provided with your Innokin CoolFire Z50. Overall Innokin have managed to carry on their excellent build quality in their Coolfire range to the Coolfire Z50 kit. The device is very ergonomic creating a nice feel all round, it's a bit of a shame they haven't utilised Type-C charging capabilities when their competitors seem to be taking this route but it doesn't make the kit fall behind.